[. . . ] A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. ς If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. [. . . ] ς If the application tool should become blocked, switch the machine off. ς When switching on with a blocked drilling tool, high torque reaction can occur. ς Apply the power tool to the screw only when it is switched off. ς Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. Ensure the On/Off switch is in the off position before inserting battery pack. Carrying the power tool with your finger on the On/Off switch or inserting the battery pack into power tools that have the switch on invites accidents. Battery tool use and care  Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. ς Use power tools only with specifically designated battery packs. ς When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. ς Under abusive conditions, liquid may be ejected from the battery; avoid contact. Service  Have your power tool serviced by a qualified repair person using only identical replacement parts. ς Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fastener may contact hidden wiring. Cutting accessory and fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. Additional Safety and Working Instructions  When transporting and storing, set the rotational direction switch to the centre position. Book Page 11 Tuesday, April 2, 2013 10:59 AM English | 11 Protect the battery against heat, e. ς In case of damage and improper use of the battery, vapours may be emitted. ς Use the battery only in conjunction with your Bosch power tool. ς Use only original Bosch batteries with the voltage listed on the nameplate of your power tool. Imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time. [. . . ] Undgå at bære el-værktøjet med fingeren på afbryderen og sørg for, at el-værktøjet ikke er tændt, når det sluttes til nettet, da dette øger risikoen for personskader. ς For at spare på energien bør du kun tænde for el-værktøjet, når du bruger det. Nedan använt begrepp ”Elverktyg” hänför sig till nätdrivna elverktyg (med nätsladd) och till batteridrivna elverktyg (sladdlösa). Book Page 53 Tuesday, April 2, 2013 10:59 AM Svenska | 53 spänningsförande ledning kan sätta elverktygets metalldelar under spänning och leda till elstöt. [. . . ]